| Weekly maintenance |
 |
|
Here are a few simple steps to a hassle-free clean with Chamber Brite. # 210-C-BRITE
For better results, clean autoclave every 20 cycles or once per week.
|
 |
|
1. Sprinkle Chamber Brite powder along the bottom of the autoclave chamber.
Caution : the chamber must be cold. |
 |
|
2. Start a sterilization cycle WITH DISTILLED WATER and NO DRYING CYCLE. |
 |
|
3. At the end of the cycle drain solution from reservoir and discard.
4. Fill reservoir and repeat steps 2 and 3 without Chamber Brite. |
 |
|
5. Wipe the interior of the chamber with a damp cloth or a sponge. |
 |
|
6. Fill reservoir with distilled water.
7. The autoclave is now ready to use!
|
 |
|
You would like to reduce your distilled water expenses? Dispomed has the solution: an easy to use and affordable steam water distiller.
More Information |
| Monthly maintenance |
| |
|
It is recommended to check the proper operation of the pressure bleed valve, at least once a month. During a cycle, use a long screwdriver or a pair of pliers to momentarily open the bleed valve by pulling on the relief pin. |
| |
|
 |
| |
|
Caution : use a long tool and protect your hands from the steam which will exit from the relief pin to avoid burns. |
| |
|
|
| Annually maintenance |
 |
|
To prevent water leaks and the obstruction of some orifices, it is recommended, at least once a year, to have some of the components of the autoclave (door gasket, bellow, air jet and e.p.a filter ) checked and replaced by one of our qualified technicians.
|
| |
|
|
